P0402
Exhaust Gas Recirculation Flow Excessive
GET CHECKED SOON
Powertrain · Emissions · generic OBD-II code
What does P0402 mean?
The computer sees more EGR flow than expected.
Can I drive with P0402?
A steady check-engine light with the car otherwise behaving normally usually means you can drive carefully to get it diagnosed — but a flashing light, shaking, lost power, or a strong fuel smell changes that. When in doubt, treat it as more serious. See Can I Drive It? for a quick read on your exact symptoms.
Common symptoms
- Check engine light
- Rough idle or light knock
- Sometimes hesitation
- Often no obvious change
Possible causes
Possible causes include — not “the part is definitely bad”:
- A stuck-open EGR valve
- A leaking EGR passage or gasket
- A sensor fault
What P0402 does not prove
It does not prove the EGR valve is faulty. Carbon-clogged passages, the control circuit, or a sensor can all set an EGR flow code.
What you can safely check
- Whether the light is steady or flashing
- Whether idle is rough
What a shop may check
An example diagnostic direction, not a guaranteed procedure:
- Scan tool and freeze-frame data
- The EGR valve and passages for carbon blockage
- The EGR control and its wiring
- Flow testing where supported
What not to do
- Don’t just replace the EGR valve — passages are often the real blockage
- Don’t keep clearing the code without cleaning or testing
Generic OBD-II guidance — manufacturer-specific codes and causes vary by make, so always confirm against your vehicle. A code identifies a system or condition; it does not, on its own, prove which part has failed.
Not sure what P0402 means for your car?
Tell us the code and what the vehicle is doing. We read it, check the freeze-frame data, and work out what actually needs looking at — before anything gets quoted.
Book a diagnosis Call (253) 375-7057
This one often comes back to Exhaust & Emissions.