P0014

What does P0014 mean?

Cam timing on bank 2 is more advanced than commanded.

Can I drive with P0014?

A steady check-engine light with the car otherwise behaving normally usually means you can drive carefully to get it diagnosed — but a flashing light, shaking, lost power, or a strong fuel smell changes that. When in doubt, treat it as more serious. See Can I Drive It? for a quick read on your exact symptoms.

Common symptoms

• Check engine light
• Rough idle or a rattle at start-up
• Reduced power or economy
• Sometimes a limp mode

Possible causes

Possible causes include — not “the part is definitely bad”:

• A stuck timing solenoid or actuator
• Dirty or low oil
• A clogged oil passage

What P0014 does not prove

It does not prove the variable-timing actuator or solenoid has failed. Dirty or low oil, a clogged screen, or wiring can all upset cam timing.

What you can safely check

• Whether the light is steady or flashing
• Whether oil has been changed on schedule (VVT relies on clean oil at the right level)
• For a start-up rattle

What a shop may check

An example diagnostic direction, not a guaranteed procedure:

• Scan tool and live cam-timing data
• Oil level and condition
• The variable-timing solenoid, its wiring and screen
• Actual cam timing versus commanded

What not to do

• Don’t replace the timing solenoid before checking oil condition and wiring
• Don’t run the engine low on oil

Generic OBD-II guidance — manufacturer-specific codes and causes vary by make, so always confirm against your vehicle. A code identifies a system or condition; it does not, on its own, prove which part has failed.